2024 Components Catalogue - Decorated Version

Laser Metal Marking HARDWARE & SHEET STOCK Engraving Supplies

COLOURING

Metal Marker G The Metal Marker G is a metal black laser marking product for CO 2 laser engravers. It allows a black marking on aluminum, brass, mild or stainless steel, magnesium and copper. Metal Marker G is sold in a 46ml (1.56oz) applicator bottle, which represents 0.9m² of coverage. This represents more than 30% more surface area covered compared to products using a spray system. Thanks to its sealed applicator bottle, the black laser marking can be stored for up to a year even after the first use. Unlike aerosol products, it is not necessary to wear a protective mask. The liquid form of the Metal Marker G ensures a non-volatile application reducing the need for PPE to the simple wearing of gloves.

NEW! PRODUCT

Description

Part Number

VIEW USER INSTRUCTIONS

Metal Marker G 46ml / 1.56oz

86424*

TherMark® laser marking tape, spray & pastes Tapes for efficient dry permanent marking and water based spray & pastes for fast clean up

TherMark tape is an ideal product for expanding the range of materials that can be marked with a CO 2 laser engraver. Available in a 50ft roll in 3 standard widths (1”, 2” & 3” wide), it can be used to create high contrast, permanent black marks on bare, plated and anodized metals. Cut the tape to the size of the mark, then simply apply by hand and engrave with a 30W and above laser. The excess tape is then peeled off to reveal the final mark. This product is suitable for outdoor use. TherMark liquid pastes allow most metals to be quickly marked using a CO 2 laser engraver. A thin coat of material can be painted or sprayed onto the metal, then left to dry for less than 2 minutes. Engrave with your laser of 25W or greater to produce high contrast, permanent black marks. The excess water-based materials can be easily washed off to reveal the final mark.

Description

Part Number

Description

Part Number

TherMark laserable tape 1" wide

TherMark LMM14 6 oz aerosol spray

48315

47821*

TherMark laserable tape 2" wide

TherMark LMM14 50g liquid paste

46255

47822

TherMark laserable tape 3" wide

TherMark LMM14 250g liquid paste

48314

47823

Cermark® laser marking spray & pastes Solvent-based for easy handling before marking

Cermark metal marking pastes also allow most metals to be marked using a CO 2 laser engraver. Similar to TherMark liquids, the Cermark products contain a hardener that allows the products to be easily handled prior to marking with your laser. The final result is the same permanent black marks on a range of bare metals. Good for CO 2 lasers, 25W and above.

Description

Part Number

Description

Part Number

LMM6000 12 oz aerosol spray

LMC-6044P Prem Blk Paste 250g

31086*

78262

LMM6000 50g liquid paste

LMC-6044 Aerosol Prem Blk Paste 50g

45694*

78263

LMM6000 250g liquid paste

LMC-6044P Black Aerosol Spray Glass 12 oz

31085*

78264

CerMark Process: All products work with most uncoated metals. Excellent for metal marking with a CO 2 laser.

LMM6000 500g liquid paste

LMM6151 Copper Metal Mark 50G

50808*

80984

LMM6000 Paste 1000Gram

77733

Caution: these colouring products require special safety measures. Use them in well ventilated rooms only and wear suitable protective clothing and gloves. Read instructions carefully before use. * These items are shipped via ground transportation only.

242