2024 Engravers Depot - Gravotech Engraving Source Book ver 5.0.2

21

Plastics Laser / Rotary

GRAVOPLY™ 2

BENEFITS

• Microthin surface layer • Perfect for small characters and detailed logos • Gravoply™ 2 Gloss has an extra durable, scratch resistant, glossy cap

CO 2

Rotary

UV Print

Indoor

Surface

Matte (continued from previous page)

Surface / Core Colour

21930 (1/16”)

Brown / White

21876 (1/16”)

Chocolate Brown / White

APPLICATIONS Badges, identification plates, interior signage...

21856 (1/32”) 21927 (1/16”)

Grey / White

SPECIFICATIONS

21915 (1/16”)

Grey / Black

Finish

Matte

Composition Engraving Depth

ABS, 2-ply

21849 (1/32”) 21917 (1/16”) 21981 (3/32”)

Black / White

.004”

Full Sheet Half Sheet

24” x 48”

24” x 24” (add -H) 12” x 24” (add -Q)

Quarter Sheet Other Size(s)

22009 (1/16”)* 29732 (1/8”)*

Black / White / Black

-

21940 (1/16”)

Black / Yellow

CAPABILITIES

Interior Exterior Shear

■

* Double Sided, 3 Ply The surface layer of Gravoply™ 2 can be lasered but the quality of the engraving may vary depending on the colours. Laser cutting is not recommended.

-

■ ■ ■ ■ ■ ■ ■ ■

Saw

Screen Print Hot Stamp Heat bending Scratch resistant Break resistant UV resistant Flexible

-

Min. temp. Max. temp.

-40°C (-40°F) 80°C (176°F)

You can mix any surface and core colours on demand. Double-sided products are also available. TECH TIPS

Call 1.800.387.3130 or visit www.engraversdepot.ca

Please Note: Sheet stock is supplied in full sheet sizes of 24”x 48”. When ordering, use the individual part number located on the individual swatches above to receive a full sheet size. To order a half sheet - 24”x 24” add “-H” after the individual part number, and to order a quarter sheet - 12”x 24” add “-Q” after the individual part number. To have adhesive pre-applied to your sheet stock, include the following with your order. For “ Interior Use ” adhesive, add part number # 111111 to have a full sheet size of 24”x 48” applied, for a half sheet - 24”x 24” add “-H” and for a quarter sheet - 12”x 24” add “-Q”. For “ Exterior Use ” adhesive, add part number # 222222 to have a full sheet size of 24”x 48” applied, for a half sheet - 24”x 24” add “-H” and for a quarter sheet - 12”x 24” add “-Q”. For “ Time Release ” adhesive, add part number # 333333 to have a full sheet size of 24”x 48” applied, for a half sheet - 24”x 24” add “-H” and for a quarter sheet - 12”x 24” add “-Q”. Printed colours are for indication only and should not be used as a real material sample.