2024 Engravers Depot - Gravotech Engraving Source Book ver 5.0.2

Metallic Material Laser / Rotary

44

GRAVOXAL™ - ANODIZED ALUMINUM

BENEFITS

• For rotary and laser engraving • High detail laser engraving • Strong anodization for a durable protection of the material

CO 2

Rotary

UV Print

Indoor

Outdoor

Surface

Satin

Gloss

Surface / Engraving Colour

Surface / Engraving Colour

34526 (.020”)** 34519 (1/32”)

34594 (.020”)** 34592 (1/32”)

Satin Red / Silver

Gloss Gold / Silver

34496 (.020”)** 34495 (1/32”)

Satin Blue / Silver

APPLICATIONS

Control panels, legend plates, award plates, interior and exterior signage...

34624 (.020”)** 34617 (1/32”) 34619 (1/16”) 34454 (.020”)** 34452 (1/32”) 34453 (1/16”)

Satin Silver / Silver

SPECIFICATIONS

Satin Black / Silver

Finish

Satin or Gloss

Composition Engraving Depth

Aluminum

Silver colours are anodized on both sides during the continuous anodization process. Protective film on one side. Due to the process, there can be stains in the corners of aluminum sheets. Laser engraving on coloured materials. The engraving contrast may vary according to the colour. ** Sheet size 12"x 24" for .020".

.004”

Full Sheet Half Sheet

24” x 24”

12” x 24” (add -H) 12” x 12” (add -Q) 12” x 24” (for .020”)

Quarter Sheet Other Size(s)

CAPABILITIES

Interior Exterior Shear

■ ■ ■ ■ ■

Saw

Screen Print Hot Stamp Heat bending Scratch resistant Break resistant UV resistant Flexible

- -

■

-

■ ■

Min. temp. Max. temp.

-40°C (-40°F) 200°C (392°F)

TECH TIPS

You can use Gravotech recommended paint to colour any Gravoxal™ engraving. See p.77. Aloxide may be used to colour gloss plates (small characters) after rotary engraving.

Please Note: Sheet stock is supplied in full sheet sizes of 24”x 48”. When ordering, use the individual part number located on the individual swatches above to receive a full sheet size. To order a half sheet - 24”x 24” add “-H” after the individual part number, and to order a quarter sheet - 12”x 24” add “-Q” after the individual part number. To have adhesive pre-applied to your sheet stock, include the following with your order. For “ Interior Use ” adhesive, add part number # 111111 to have a full sheet size of 24”x 48” applied, for a half sheet - 24”x 24” add “-H” and for a quarter sheet - 12”x 24” add “-Q”. For “ Exterior Use ” adhesive, add part number # 222222 to have a full sheet size of 24”x 48” applied, for a half sheet - 24”x 24” add “-H” and for a quarter sheet - 12”x 24” add “-Q”. For “ Time Release ” adhesive, add part number # 333333 to have a full sheet size of 24”x 48” applied, for a half sheet - 24”x 24” add “-H” and for a quarter sheet - 12”x 24” add “-Q”. Printed colours are for indication only and should not be used as a real material sample.