2026 Engravers Depot - Gravotech Engraving Source Book ver 5.0.3

Engraving Supplies

79

COLOURING

Laser Metal Marking

TherMark® laser marking tape, spray & pastes Tape for efficient dry permanent marking and water-based spray & pastes for fast clean up TherMark® tape is an ideal product for expanding the range of materials that can be marked with a CO 2 laser engraver. Available in a 50ft roll in 3 standard widths (1”, 2” & 3” wide), it can be used to create high contrast, permanent black marks on bare, plated and anodized metals. Cut the tape to the size of the mark, then simply apply by hand and engrave with a 30W and above laser. The excess tape is then peeled off to reveal the final mark. This product is suitable for outdoor use. TherMark® liquid pastes allow most metals to be quickly marked using a CO 2 laser engraver. A thin coat of material can be painted or sprayed onto the metal, then left to dry for less than 2 minutes. Engrave with your laser of 25W or greater to produce high contrast, permanent black marks. The excess water-based materials can be easily washed off to reveal the final mark.

Description

Part Number

Description

Part Number

TherMark laserable tape 1" wide

TherMark LMM14 6 oz aerosol spray

48315

47821*

TherMark laserable tape 2" wide

TherMark LMM14 50g liquid paste

46255

47822

TherMark laserable tape 3" wide

TherMark LMM14 250g liquid paste

48314

47823

Paint/Colour Fills

Colour

Part Number

White

32824

Red

32827

Black

32828

Green

32829

Colour

Part Number

Blue

32830

Engravocolor sticks For brushless colour filling of plastics and base metals. When ordering Engravocolor sticks separately, specify part number and quantity for each colour. Sticks are .8 oz.

Grecian gold

51675

Rub N Buff* For rich looking fills on non-porous surfaces. Excellent engraving colour fill for glass. Just dab on, rub in, and buff off excess. Tubs are 1/2 oz.

Yellow

32831

Silver

51672

12 assorted - 4 black, 4 white, 1 each of others

32823

Spanish copper

51676

Black

51677

* These items are shipped via ground transportation. For other means of transport, please consult us.

Colour Part Number

Colour

Part Number

White

Green

32808

32813

Orange

Blue

32810

32814

Red

Yellow

32811

32815

Deluxe Paint fill pen - Ref. 51674 Tool for use in engraving

Black

Gray

32812

32817

& paint filling. No outside source/compressed air needed. Comes with 4 different easy-to-change tip sizes. A must for engravers who colour fill.

Engravers Enamel* For filling engraving in metal and plastic. Not recommended for use on Metallex. 1/2 pint cans.

Laser Foil

Solid colour 2mm thick mylar tape for laser engraving. Adds colour and richness to your laser engraved products. A permanent acrylic adhesive that is great for wood.

Low Tack Paper Mask 6”x 100 yrds

Colour

Part Number

Black

45887

Paper mask designed to protect your engraving from burning and provides clean edges. Ref. 45897

Green

45894

Bright Gold

46119

Brushed Gold

46120

Silver

46123

Call 1.800.387.7439 or visit www.engraversdepot.ca